Product description
Get-a-bond is a multi purpose adhesive and bonding agent. Get-a-bond will bond most common building materials to them selves or to each other provided one surface is porous. Get-a-bond will not bond two impervious surfaces no PVC, ABS, application is building industry. Get-a-bond improves the workability of cement mortars and has many applications in the building industry.
Special features
[ ] Single component, PVA based. [ ] Excellent bond to concrete, masonry, stone work, plaster and block board. [ ] Reduces permeability of cement mortars. [ ] Improve tensile and flexural strength. [ ] Compatible with common hydraulic cement. [ ] Get-a-bond is economical to use.
Where to use
Renderings, mortars and slurries. Repair of worn, damaged and spalled concrete. For improving and bonding floor topping, bonding of slip bricks and tiles.
Product data
APPEARANCE : Milky White. CONSISTENCY : Viscous material . VOLUME SOLID : 34 % PRODUCT WEIGHT : 1.05 kg/ltr. VISCOSITY : 27 – 32 Poise R/T. FLASH POINT : Non-flammable (water-borne product)
Product data
www.gtcpaints.com
Application details
Blend cement and sand separately. Add Getabond and water mixed together. If necessary add more water until the desired consistency is obtained. A. Bonding Grout : Get-a-bond 1 LTR. Water 1 LTR. Portland Cement 8 KG. In order to obtain a smooth consistency. The cement should be blended slowly into the liquid. It should be applied with stiff bristle brush. B. Patching & Repair Mortar (6-40m.m Thick) Cement 50 KG. Sand 150 KG. Get-a-bond 10 LTR. Water 8 LTR. C. Render Works (6-9m.m per Layer) Cement 50 KG. Sand (1.m.m.) 150 KG. Water 6 LTR Get-a-bond 10 LTR. The render should be semi dry (cohesive consistency). D. Heavy Duty Floor Screed (10-24 m.m Thick) Cement 50 KG. 3-6 m.m Granite chips 75 KG. Sand (1.m.m.) 75 KG. Get-a-bond 10 LTR. Water 6 LTR. Screed should be semi dry ( cohesive consistency ). E. Bonding Bricks & Tile (6-40 m.m Thick) Cement 10 KG. Sand (1.m.m) 25 KG. Water is adjusted to give a film’ mortar Get-a-bond 3 LTR.
Application details
www.gtcpaints.com
Cleaning tools
All equipments should be cleaned with water immediately after use. RECOMMENDATION : [ ] Any steel trowelling should be very light, with minimum number of passes. [ ] All applications should be wet, the primer must not be allowed to dry . [ ] Mixture may need adjustment of water to achieve required consistency.
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104 °F) . Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Packing should be tightly closed after use. Mix well before use. Storage temperature range between 5°C (41°F) to 40°C (104 °F).
Safety precautions
The following notes should be considered when using/applying material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at one). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of product with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
• 5.5 kg Jerrycan. • 20 kg Jerrycan .