Product description
Get-A-Seal CL-50 is an adhesive used for various insulation material such as woven glass fiber, fabric, canvas etc. It has coating properties allowing it to be used as such.
Special features
• Is a non flammable when wet. • Is water based. • Has both properties of coating and adhesive. • Has a flexible film.
Where to use
• Get-A-Seal CL-50 is used for bonding canvas and cloth to many insulated surfaces. • For bonding laps of fibrous and woven glass cloths on pipe insulation. • A coating over all the above fabrics and over plastic foam material such as polystyrene.
Product data
Colour : White Consistency : Viscous Liquid. Specific Gravity : 1.25 + 0.05 KG/LTR.
Drying times
Touch dry 2 hours, drying time depends upon film thickness and temperature. Coverage : 2 M 2/kg Per One Coat Bonding Canvas : 4 M 2/kg No of Coats : Two coats are recommended.
Surface preparation
The surface to be coated must be clean, dry, free of oil and grease. • Application of Adhesive CL-50 is easily applied by brush/roller or spray. Diluted CL-50 some time is used for dipping canvas for certain applications.
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104 °F) . Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5°C (41°F) to 40°C (104 °F).
Standards and approvals
Supportive information is available upon request. Please consult with GTC Technical Service Dept.
Safety precautions
The following notes should be considered when using/applying material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at one). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
4 KG Gallon. • 20 KG Drums.