Product description
Get-A-Seal VS-30 adhesive is a water base duct sealant which provides a protective layer that acts as a vapour barrier for air conditioning duct joints for hot and chilled water systems.
Special features
Get-A-Seal VS-30 adhesive films and layers remain flexible and functional through a wide range of temperature. Provides a protective finish which acts as a vapour barrier for duct joints. Resists high humidity and water. Excellent for sealing and joining all types of insulation materials. Get-A-Seal VS-30 adhesive has a heavy thixotropic body which will not sag or run which makes it ideal for vertical as well as horizontal surfaces. Can be supplied in an antifungal type with broad Biocidal activity. (GET-A-SEAL VS-30 BI)
Where to use
Get-A-Seal VS-30 adhesive seals expansion joints in many types of materials against humidity and water vapour ingress, it remains flexible and functional through a wide temperature range. It can be used on polyurethane, polystyrene, mineral wool, fibrous glass, and other insulation materials.
Product data
Colour : Grey. Consistency : Thixotropic Paste. Specific Gravity : 1.45 + 0.05 kg /ltr. Odour : Slight odour when wet, odorless when dry.
Drying times
2 hrs. touch dry, about 12 hrs. through dry depending on temperature, humidity and film thickness. Coverage : 160 gram for 1x1 cm linear joint. Flammability : Non flammable, water based. Clean Up : Water when wet or GTC Cleaner when dry.
Surface preparation
The surface to be sealed must be sound, dry and free from oil grease, dust and other contamination. Application of Adhesive Get-A-Seal VS-30 adhesive duct sealant can be applied with putty knife spatula, trowel, caulking gun or can be extruded, it has a heavy thixotropic body and will not sag or run.
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104 °F) . Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5°C (41°F) to 40°C (104 °F).
Standards and approvals
Supportive information is available upon request. Please consult with GTC Technical Service Dept.
Safety precautions
The following notes should be considered when using/applying material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at one). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
5 KG Gallon.