Product description
A high quality Clear Varnish Solution based on Long Oil Alkyd Resin intended for application over wooden surfaces.
Special features
- Excellent flow and easy to apply. - Good gloss retention properties. - Provides a smooth and hard glossy finish. - Relatively quick drying with good penetration properties.
Where to use
Mainly intended for Internal usage as decorative and protective finish/coat over wooden surfaces i.e. - Doors - Wood Paneling - Wooden Frames - Wooden Furniture
Product data
FINISH : Gloss COLOUR : Clear & according to GTC Varnish Stain Colour Card Range VOLUME SOLIDS : 42 %. PRODUCT WEIGHT : 0.9 Kg/Ltr. REC. FILM THICKNESS : Wet : 60 microns per coat (approx 2.35 mils) Dry : 25 microns per coat (approx 1 mils) THEO. COVERAGE : 16.8 m2/ltr. Practical coverage primarily depends upon nature/ method of application and site conditions. FLASH POINT : Above 35°C (95 °F)
Drying times
SUBSTRATE TOUCH HARD OVERCOATING INTERVALS TEMPERATURE DRY DRY MINIMUM MAXIMUM 10°C (50°F) 4 hrs. 18 hrs. 24 hrs. IND. 25°C (77°F) 3 hrs. 14 hrs. 18 hrs. IND. 40°C (104°F) 2 hrs. 8 hrs. 14 hrs. IND.
Standards and approvals
GTC Alkyd Varnish Clear is formulated to ASTM D-154/1985 and has been passed as suitable for usage in Kuwait by Government Laboratories and Testing Stations.
Surface preparation
1) Surfaces to be coated must be dry, clean and free from oil, grease.. etc. 2) Wood must not contain more that 17% moisture. 3) Surface must be sanded and/or ground to eliminate surface imperfections.
Where to use
Intend for a two or three coat applications over suitably prepared wooded surfaces.
Mixing and thinning
Material must be properly mixed and is recommended for thinning with GTC002 Thinner as per below table:- APPLICATION METHOD BRUSH/ROLLER CONV. SPRAY AIRLESS SPRAY Thinning by volume 10% 20% 5% (% Max.)
Important restrictions
For best results Brush Application is recommended for first coat as this method helps achieving maximum penetration and adhesion into the substrate.
Cleaning tools
For cleaning tools and equipments use GTC002 Thinner.
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104 °F) . Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5°C (41°F) to 40°C (104 °F).
Safety precautions
The following notes should be considered when using/applying painting material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
[ ] Gallon : [ ] 18 Ltr. Drum