Product description
Getacryl is a one pack solvent-base coating based on an Acrylic Resin with excellent resistance to alkalies. It is formulated for application on concrete, masonry, mineral substrates, textured finishes etc....
Special features
♦ Very good gloss and flow adhesion. ♦ Very good alkali resistance. ♦ Very good exterior durability ♦ Fast drying ♦ Superior colour retention. ♦ Extremely tough flexible films.
Where to use
As an Exterior/Interior decorative and protective finish coat offering an extremely hard/flexible film over concrete, steel, textured paints.
Product data
FINISH : GLOSSY. COLOUR : White & GTC Colour Card Range. Special colours are available upon request. VOLUME SOLIDS : 45%. PRODUCT WEIGHT : 1.2 kg/ltr. REC. FILM THICKNESS : Wet : 110 microns per coat (approx 4.37 mil) Dry : 50 microns per coat (approx 2 mil) THEO. COVERAGE : 9 m²/ltr. Practical coverage primarily depends upon nature/degree of surface porosity, method of application and site conditions. FLASH POINT : Greater than 23°C (73°F).
Drying times
SUBSTRATE TEMPERATURE | TOUCH DRY | HARD DRY | OVERCOATING INTERVALS | | | MINIMUM | MAXIMUM 10 °C (50 °F) | 4 hrs | 16 hrs. | 14 hrs. | IND. 25 °C (77 °F) | 3 hrs | 12 hrs. | 10 hrs. | IND. 40 °C (104 °F) | 2 hrs | 10 hrs | 8 hrs. | IND.
Surface preparation
A. DEGREE OILY/GREASY SURFACES IN ACCORDANCE WITH SSPC-SP1 CLEANING. B. CONCRETE/CEMENT SURFACES SHOULD BE SOUND CLEAN AND COMPLETELY CURED AND FREE FROM SALTS AND LAITANCE. C. TEXTURED SURFACES MUST BE CLEAN/DRY AND SOUND.
Where to use
Intended for a two or three finish coats application over suitably sealed/primed, puttied and undercoated surfaces.
Mixing and thinning
Material must be properly mixed and is recommended for thinning with GTC005 Thinner as per below table:- APPLICATION METHOD | BRUSH/ROLLER | CONV.SPRAY | AIRLESS SPRAY Thinning by volume(% max.) | 15 % | 25 % | 5 %
Important restrictions
For external usage, it is not recommended to apply Interior Putty material.
Cleaning tools
For cleaning tools and equipments use GTC005 Thinner.
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104 °F). Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5°C (41°F) to 40°C (104 °F).
Standards and approvals
Supportive information is available upon request to establish product compliance with a particular specification. Please consult with GTC Technical Service Dept.
Safety precautions
The following notes should be considered when using/applying painting material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
• Gallon : • 18 Ltr. Drum