Product description
A one pack advanced quality Polyurethane Lacquer particularly formulated to meet with increased demang on appealing and protective coatings in the wooden industry.
Special features
[ ] Resistant to moisture and weathering conditions. [ ] Resistant to abrasion. [ ] Easy to apply providing an enhanced surface smoothness. [ ] Very good leveling properties. [ ] Very good retentive characteristics (Gloss Version).
Where to use
As a decorative and protective clear finish coat over Interior/Exterior wooden surfaces i.e.: [ ] Wooden Floors (basketball playground). [ ] Furniture. [ ] Doors and Wooden Frames. [ ] Wooden Pallets.
Product data
FINISH : GLOSS/MATT COLOUR : Finish is available upon request. VOLUME SOLID : 50 % PRODUCT WEIGHT : 0.9 Kg/ltr. REC. FILM THICKNESS : Wet : 75 microns per coat (approx 3 mils) Dry : 35 microns per coat (approx 1.4 mil) THEO. COVERAGE : 14.2 m2/ltr. Practical coverage primarily depends on nature/degree of surface porosity, method of application and site conditions. FLASH POINT : Above 35°C (95°F)
Drying times
SUBSTRATE TEMPERATURE | TOUCH DRY | HARD DRY | OVERCOATING INTERVALS MINIMUM | MAXIMUM -----------------------|------------|----------|---------------------------|-------- 10 ºC (50 ºF) | 4 hrs. | 30 hrs. | 24 hrs. | IND. 25 ºC (77 ºF) | 3 hrs. | 24 hrs. | 20 hrs. | IND. 40 ºC (104 ºF) | 2 hrs. | 18 hrs. | 16 hrs. | IND.
Where to use
Intended for a two or three coat application over suitably prepared wooden surfaces.
Mixing and thinning
Material must be properly mixed and is recommended for thinning with GTC002 Thinner as per below table:- APPLICATION METHOD | BRUSH/ROLLER | CONV. SPRAY | AIRLESS SPRAY -------------------|--------------|-------------|-------------- Thinning by volume (% Max.) | 15 % | 20 % | 5 %
Important restrictions
For best results Brush Application is recommended for first coat as this method helps achieving Maximum penetration and adhesion into the substrate.
Cleaning tools
For cleaning tools and equipments use GTC002 Thinner.
Application conditions
At a temperature ranging 5ºC (41ºF) to 40ºC (104 ºF) . Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5ºC (41ºF) to 40ºC (104 ºF).
Standards and approvals
GTC Polyurethane Lacquer - Clear is formulated to ASTM D - 154/1985 and has been passed as suitable for use in Kuwait by the Government Laboratories and Testing Stations.
Safety precautions
The following notes should be considered when using/applying painting material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once) (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
Gallon • 18 Ltr. Drum