Product description
A superior quality Binder / Sealer based on Acrylic Dispersion designed to serve as surface conditioner over porous substrates to provide a key for subsequent top coats.
Special features
• High penetrating and good sealing properties. • Very good alkali resistance. • Very good drying properties. • Reduces the absorption of new porous substrates.
Where to use
As an Interior/Exterior protective and priming/sealing coat over new and old building substrates i.e., • Fairface Concrete GRG Blocks New & Old Plaster • Concrete Structure Gypsum Board
Product data
FINISH : GLOSSY yet surface should not appear glazed after coating. COLOUR : Transparent VOLUME SOLID : 15% PRODUCT WEIGHT : 1.05 Kg/ltr. REC. FILM THICKNESS : Wet : 67 microns per coat (approx 2.7 mils) Dry : 10 microns per coat (approx 0.4 mil) THEO. COVERAGE : 15 m2/ltr. Practical coverage primarily depends on nature/degree of surface porosity, method of application and site conditions. FLASH POINT : Non-flammable (water-borne product)
Drying times
SUBSTRATE TEMPERATURE | TOUCH DRY | HARD DRY | OVERCOATING INTERVALS | | | MINIMUM | MAXIMUM 10 °C (50 °F) | 2 hrs. | 6 hrs. | 6 hrs. | IND. 25 °C (77 °F) | 1 hour | 4 hrs. | 5 hrs. | IND. 40 °C (104 °F) | 30 min. | 2 hrs. | 4 hrs. | IND.
Surface preparation
NEW SURFACE: 1. Degrease areas where grease, oil, soil and other surface contamination exist in accordance with SSPC-SP1 Solvent Cleaning. (Use GTC002 Thinner). 2. Wire brush/Mechanical Power Tool Clean areas where laitance, surface porosity and loosely adhering foreign material exist in accordance with SSPC-SP2 and/or SSPC-SP3 Standards. 3. Surfaces to be coated must be dry, clean and dust free prior to paint application process. OLD/PREVIOUSLY PAINTED SURFACES: 1. Degrease areas where grease, oil and other surface contamination exist in accordance with SSPC-SP1 Solvent Cleaning. (Use GTC002 Thinner). 2. Remove all blistered, cracked and brittle paint coats off the surface. 3. Detached coats with inadequate adhesion must be scraped-off to a firm edge. 4. Glossy paint coatings must be sanded/roughened to ensure proper intercoat adhesion characteristics. 5. Surfaces to be coated must be dry, clean and contamination free prior to paint application process.
Application details
• USAGE: Intended for a single coat application over well prepared Internal/External porous surface.
Mixing and thinning
Material must be properly mixed and is recommended for thinning 50% - 100% by volume with fresh water only. • METHOD OF APPLICATION: GTC Acrylic Sealer can be applied by Brush, Roller, Conventional and Airless Spray.
Important restrictions
(1) For best results over porous surfaces brush application is recommended as this method helps achieving maximum penetration and adhesion into the substrate. (2) This product can be overcoated with all types of oil or water based paints and putty.
Cleaning tools
For cleaning tools and equipments use fresh water only.
Application conditions
At a temperature ranging 5 cC (41 f) to 40 cC (104 f) . Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5 cC (41 f) to 40 cC (104 f).
Standards and approvals
GTC Acrylic Sealer is formulated to KUWAIT STANDARD SPECIFICATION, modified KSS 513/1994 and has been passed as suitable for use in Kuwait by Government Laboratories and Testing Stations.
Safety precautions
The following notes should be considered when using/applying painting material: (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
Ltr. Drum