Product description
DL Aquasheen is a polyurethane water-based, and ideal finishing for the application of the decorative " DL ARMONI , DL TRAVERTINE, Antique Techniques " for the decoration of floors and walls with a "Limitless effect " for high prestige and elegance in a contemporary style and high tech.
Special features
[ ] Clear protection. [ ] Good film formation, excellent results of hardness, chemical resistance, abrasion resistance and impact.. [ ] Easy to apply. [ ] Offers a durable and long lasting finish. [ ] Excellent graffiti resistance. [ ] Excellent cleanability. [ ] DL Aquasheen available in Matt, Semi-Gloss and Gloss Finish. [ ] Protection for wooden floors (Parquet).
Where to use
As a protective/decorative coating for exterior and interior surfaces especially over "DL ARMONI" or Technique Stuccoos surfaces on walls and floors.
Product data
FINISH : AQUASHEEN Matt AQUASHEEN Semi-Gloss AQUASHEEN Gloss COLOUR : Clear. PRODUCT WEIGHT : 1 Kg/Ltr. THEO. COVERAGE : 14 m2/ ltr. per coat Practical coverage primarily depends upon nature/degree of surface porosity, method of application and site conditions. FLASH POINT : Non-flammable (water-borne product)
Drying times
SUBSTRATE TEMPERATURE | TOUCH DRY | HARD DRY | OVERCOATING INTERVALS (MINIMUM) | MAXIMUM 10 °C (50 °F) | 1.5 hrs. | 9 hrs. | 9 hrs. | 48 hrs. 25 °C (77 °F) | 1 hour | 8 hrs. | 8 hrs. | 24 hrs. 40 °C (104 °F) | 45 min. | 7 hrs. | 7 hrs. | 20 hrs.
Surface preparation
Remove all dust, dirt, oil and grease contamination, loose particles, laitance and old paint...etc, the surface must be smooth and dry.
Application details
It is Intended for two coats application after thinning of 5% - 10% by volume with fresh water, apply a first coat by Roller of "DL Aquasheen Semi-Gloss" OR "DL Aquasheen Gloss" apply a second coat after at least 8 hours, but not later than 48 hours, apply a second coat, always by Roller, if the application of the second coat runs over the 48 hours, the surface must be sanded before applying the second coat.
Cleaning tools
For cleaning tools and equipment use fresh water only.
Application conditions
At a temperature ranging 5ºC (41ºF) to 40ºC (104 ºF). Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5ºC (41ºF) to 40ºC (104 ºF).
Standards and approvals
Supportive information is available upon request to establish product compliance with a particular specification. Please consult with GTC Technical Service Dept.
Safety precautions
The following notes should be considered when using/applying painting material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
2.5 ltr. Can : 15 ltr. Drum