Product description
Super Glaze is a transparent superior quality water based surface glazing compound designed to impart high sheen and protection to various surfaces.
Special features
• Excellent exterior durability & hardness. • Controllable gloss level. • Water resistant. • Can overcoat various finishes. • Alkali resistant.
Where to use
As a Glaze over most substrates • Most painted surfaces (Emulsion etc...) • Concrete. • Plaster. • Texture finish.
Product data
FINISH : GLOSSY & SILK FINISH . COLOUR : CLEAR. VOLUME SOLIDS : 40% . PRODUCT WEIGHT : 1.1 Kg/Ltr. THEO. COVERAGE : Depends on surface & gloss level. FLASH POINT : Non-flammable (water-borne product)
Drying times
SUBSTRATE TEMPERATURE | TOUCH DRY | HARD DRY | OVERCOATING INTERVALS | | | MINIMUM | MAXIMUM 10 °C (50 °F) | 2 hrs. | 6 hrs. | 6 hrs. | IND. 25 °C (77 °F) | 30 min | 4 hrs. | 5 hrs. | IND. 40 °C (104 °F) | 15 min. | 2 hour | 4 hrs. | IND.
Surface preparation
Surface to be coated must be dry, clean and contamination free prior to paint application process.
Application details
• USAGE: Intend for a single or multicoat application to the desired gloss level.
Mixing and thinning
Material must be properly mixed with fresh water to the correct painting consistency. • METHOD OF APPLIATION: Super Glaze can be applied by Brush, Roller, conventional & Airless Spray.
Cleaning tools
For cleaning tools and equipment use fresh water only.
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104 °F) . Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5°C (41°F) to 40°C (104 °F).
Safety precautions
The following notes should be considered when using/applying painting material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
1 LTR.