Product description
Hi-Shade is an acrylic colour toning coating which is extremely weather resistant. It may be tinted to a multitude of shades as per requirement. Hi-Shade is designed as a final coat on Adobe decorative paste and most other textured finishes.
Special features
• Excellent weather resistance. • Very slow drying. • Thixotropic does not run or sag. • Excellent levelling. • Very flexible yet hard. • Offers beautiful shades.
Where to use
On most textured finishes and structured coatings.
Product data
FINISH : MATT. COLOUR : LIGHT COLOURS Special colours are available upon request. VOLUME SOLID : 13%. PRODUCT WEIGHT : 1.10 approx. FLASH POINT : Non-Flammable (water borne product). THEO. COVERAGE : Depends on surface & gloss level.
Drying times
SUBSTRATE TEMPERATURE | TOUCH DRY | HARD DRY | OVERCOATING INTERVALS 10 °C (50 °F) | 2 hr. | 6 hrs. | 6 hrs. | IND. 25 °C (77 °F) | 30 min. | 4 hrs. | 5 hrs. | IND. 40 °C (104 °F) | 20 min. | 2 hrs. | 4 hrs. | IND. USAGE :- • On top of all textured finishes.
Application details
On clean well prepared rough finish (Adobe or texture) apply by roller, brush or garment as required to the correct shade.
Application details
THINNING :- Use fresh water to a minimum if colour strength is to be maintained.
Cleaning tools
Fresh water (Discard effluent as per prevailing government regulations
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104 °F). Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5°C (41°F) to 40°C (104 °F).
Safety precautions
The following notes should be considered when using/applying painting material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used. (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
Gallon • 18 Ltr. Drum