Product description
Rosa Silk is a high quality based on modified Acrylic Paint offering aesthetic beauty and functionality for interior substrates.
Special features
• Excellent decorative and protective properties. • Excellent colour retention. • Excellent washability and alkali resistance. • High flexibility. • Excellent scrub resistance. • Excellent adhesion. • Very good flow and drying properties.
Where to use
As an Interior decorative and protective coat over new as well as old building substrates i.e.... • Fairface Concrete GRG Blocks Plastered Walls. • Bricks. GRC Blocks Gypsum Board
Product data
FINISH : Silk (¼ Gloss) COLOUR : According to GTC COLOUR CARD RANGE, including White and Black. (Special colours are available upon request). VOLUME SOLID : 40 %. PRODUCT WEIGHT : 1.35 kg./ltr. REC. FILM THICKNESS : Wet : 75 microns per coat (approx. 3 mils) Dry : 30 microns per coat (approx. 1.2 mils). THEO. COVERAGE : 13 m²/ltr. Practical coverage primarily depends upon nature/degree of surface porosity, method of application and site conditions. FLASH POINT : Non-flammable (water-borne product).
Drying times
SUBSTRATE TEMPERATURE | TOUCH DRY | HARD DRY | OVERCOATING INTERVALS | | | MINIMUM | MAXIMUM 10 °C (50 °F) | 1.5 hrs. | 6 hrs. | 5 hrs. | IND. 25 °C (77 °F) | 45 min. | 4 hrs. | 3 hrs. | IND. 40 °C (104 °F) | 30 min. | 3 hrs. | 2 hrs. | IND.
Surface preparation
NEW SURFACES: 1. Degrease areas where grease, oil, soil and other surface contamination exist in accordance with SSPC-SP1 Solvent Cleaning . (Use GTC002 Thinner). 2. Wire brush/Mechanical Power Tool Clean areas where laitance, surface porosity and loosely adhering foreign material exist in accordance with SSPC-SP2 and/or SSPC-SP3 Standards. Surfaces to be coated must be dry, clean and contamination free prior to paint application process. OLD/PREVIOUSLY PAINTED SURFACES :- 1. Degrease areas where grease, oil and other surface contamination exist in accordance with SSPC-SP1 Solvent Cleaning. (Use GTC002 Thinner). 2. Remove all blistered, cracked and brittle paint coats off the surface. 3. Detached coats with inadequate adhesion must be properly scraped-off to a firm edge. 4. Glossy paint coatings must be sanded/roughened to ensure proper intercoat adhesion characteristics with successive paint coatings. 5. Surfaces to be coated must be dry, clean and contamination free prior to paint application process.
Application details
• USAGE OF ROSA SILK : Intended for a two or three finish coat applications over suitably sealed/primed and puttied surface.
Mixing and thinning
Material must be properly mixed and thinned with fresh water only up to 10% by volume.
Cleaning tools
For cleaning tools and equipments use fresh water only.
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104 °F) . Relative humidity is below 75%.
Safety precautions
(a) The following notes should be considered when using/applying painting material:- Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
Gallon • 18 Ltr. Drum The Final volume of colors produced will depend upon the content of each color.