Product description
A water-borne decorative finish based on Acrylic copolymer, mixed with metallic pigments to gives surfaces an antiqued look. That produce highly original light mutations and stunning reflections.
Special features
• Excellent washability. • Fully washable and water proof. • Neither flammable nor hazards, being as mindful of environment as of personal health. • Has luminous sheen, marked by bright metallic reflections. • Easy to apply provide smooth, rich and water permeable film .
Where to use
As a decorative finish for Interior/exterior new as well as old surfaces i.e. • All kind of plasters, plaster boarded, gypsum boards. • Iron surfaces primed using White anticorrosion primer such as stairways, gates, and exposed iron ware parts. • Wood surfaces primed using wood primer.
Product data
FINISH : Smooth Metallic Reflection. COLOUR : According to GTC COLOUR CARD. Special colours are available upon request . PRODUCT WEIGHT : 1.12 Kg/Ltr. THEO. COVERAGE : 10 m2/ ltr. per coat Practical coverage primarily depends upon nature/degree of surface porosity, method of application and site conditions. FLASH POINT : Non-flammable (water-borne product)
Drying times
SUBSTRATE TEMPERATURE | TOUCH DRY | HARD DRY | OVERCOATING INTERVALS MINIMUM | MAXIMUM 10 °C (50 °F) | 3 hrs. | 5 hrs. | 5 hrs. | IND. 25 °C (77 °F) | 2 hrs. | 4 hrs. | 4 hrs. | IND. 40 °C (104 °F) | 1 hour | 3 hrs. | 3 hrs. | IND.
Surface preparation
Remove all dust, dirt, oil and grease contamination, loose particles, laitance and old paint...etc, the surface must be smooth and dry.
Application details
1. APPLICATION OF CONCRETE/PLASTER WALLS : 1st Coat : One coat Acrylic Sealer 100% thinning by volume with water. OR 2nd Coat : Penetrol Sealer 25% thinning by volume with water. 3rd & 4th Coat : One coat DL ART Primer matching the color of DL Reflecto finish coat or Two coats of DL Reflecto finish colour, by using brush no need of thinning, by spray thinning of 15-20% by volume 2 coats of DL Reflecto finish coat with water . 2. APPLICATION OF METALIC SURFACES : 1st Coat : One coat of suitable anticorrosion primer (i.e. Zinc Phosphate Primer White). 2nd & 3rd Coat : Two coats of DL Reflecto finish coat. 3. APPLICATION OF WOOD SURFACES : 1st Coat : One coat of GTC Wood Primer White. 2nd &3rd Coat : Two coats of DL Reflecto finish coat.
Cleaning tools
For cleaning tools and equipment use fresh water only.
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104 °F) . Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5°C (41°F) to 40°C (104 °F).
Standards and approvals
Supportive information is available upon request to establish product compliance with a particular specification. Please consult with GTC Technical Service Dept.
Safety precautions
The following notes should be considered when using/applying painting material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
2.5 ltr. Plastic Can.