Product description
A water-borne decorative paint finish for interior use, consisting of water base styrene-Acrylic resins enriched with pre-pigmented beads, metallic pigments, and special fillers. DL STARS generates surprisingly nuanced and stunning reflections, producing highly original light mutations that brighten up the rooms and make them look trendy at the same time.
Special features
• Easy to apply that can achieve great results and crystal fine decorations. • Washable and water proof. • Neither flammable nor hazardous, being as mindful of the environment as of personal health. • Excellent adhesion characteristics and colour retention properties.
Where to use
DL STARS is decorative finish is ideal for interior surfaces and may applied to all kinds of plasters, plaster boards, and concrete surfaces, as well as wood and metal panels as long as they are treated with appropriate primers.
Product data
FINISH : Crystalline effect. COLOUR : According to GTC COLOUR CARD, Special colours are available upon request. PRODUCT WEIGHT : 1.2 Kg/Ltr. THEO. COVERAGE : 7 m / ltr. per coat Practical coverage primarily depends upon nature/degree of surface porosity, method of application and site conditions. FLASH POINT : Non-flammable (water-borne product)
Drying times
SUBSTRATE TEMPERATURE | TOUCH DRY | HARD DRY | OVERCOATING INTERVALS MINIMUM | MAXIMUM 10°C (50°F) | 3 hrs. | 5 hrs. | 5 hrs. | IND. 25°C (77°F) | 2 hrs. | 4 hrs. | 4 hrs. | IND. 40°C (104°F) | 1 hour | 3 hrs. | 3 hrs. | IND.
Surface preparation
Remove all dust, dirt, oil and grease contamination, loose particles, laitance and old paint ...etc, the surface must be smooth and dry.
Application details
1. APPLICATION OF CONCRETE/PLASTER WALLS : 1st Coat : One coat Acrylic Sealer 100% thinning by volume with water. OR Penetrol Sealer 25% thinning by volume with water. 2nd Coat : One coat DL ART Primer matching the color of DL STARS finish coat or White. 3rd & 4th Coat : Two coats of DL STARS finish colour, by using brush 35% thinning by volume with water Or one coat without water thinning. 2. APPLICATION OF METALLIC SURFACES: 1st Coat : One coat of suitable anticorrosion primer (i.e. Zinc Phosphate Primer White). 2nd & 3rd Coat : Two coats of DL STARS finish coat by using brush 35% thinning by volume with water. 3. APPLICATION OF WOOD SURFACES: 1st Coat : One coat of GTC Wood Primer White. 2nd & 3rd Coat : Two coats of DL Cristal finish coat by using brush 35% thinning by volume with water.
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104°F). Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5°C (41°F) to 40°C (104°F).
Standards and approvals
Supportive information is available upon request to establish product compliance with a particular specification. Please consult with GTC Technical Service Dept.
Safety precautions
The following notes should be considered when using/applying painting material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
2.5 ltr. Plastic Can.