Product description
DL WAX is a special protective water-borne finish with special waxes and water borne additives. It comes in classic version (transparent), one with Golden reflections, and one with Silver reflection.
Special features
• 6 Protect decoration finish specially stucco from dust and water. • 6 Neither flammable nor hazards, being as mindful of environment as of personal health. • 6 It has glossy finish and smooth. • 6 DL WAX Gold and Silver differ from the classic version for their golden and silver hues that stand out depending on the angle of vew. • 6 Highly washable.
Where to use
As decorative finish for interior stucco application for lending surfaces bright and shiny look.
Product data
FINISH : GLOSSY. COLOUR : Classic - Clear Gold - reflection Silver - reflection Natural - Clear PRODUCT WEIGHT : 1 Kg/Ltr. THEO. COVERAGE : 15 m2/ ltr. per coat Depending on substrate and desired effect. FLASH POINT : Non-flammable (water-borne product)
Drying times
SUBSTRATE TEMPERATURE | TOUCH DRY | HARD DRY | OVERCOATING INTERVALS MINIMUM | MAXIMUM 10 0C (50 °F) | 8 hrs. | 10 hrs. | 24 hrs. | IND. 25 °C (77 °F) | 6 hrs. | 8 hrs. | 24 hrs. | IND. 40°C (104 °F) | 5 hour | 7 hrs. | 24 hrs. | IND.
Surface preparation
The surface previously treated with stucco must be completely smooth, clean and dry.
Application details
Apply a coat of DL WAX with a dry cloth or swab; spread the product onto the surface, taking care to level the amount evenly. After about 30 minutes proceed to polish the surface manually with a special mechanical device and buffer. After the second coat of stucco, when applying DL WAX Gold and Silver versions, we do not recommended full polishing with the stainless steel float. Rather It is best to leave slight, unpolished nuances that facilitate the absorption of the WAX.
Cleaning tools
For cleaning tools and equipment use fresh water only.
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104 °F) . Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5°C (41°F) to 40°C (104 °F).
Standards and approvals
Supportive information is available upon request to establish product compliance with a particular specification. Please consult with GTC Technical Service Dept.
Safety precautions
The following notes should be considered when using/applying painting material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
• 6 2.5 ltr. Can • 6 1 ltr. Plastic Can.