A water-borne decorative paint finishes paints based on modified Acrylic Copolymer, mixed with micaceous and metallic pigments to provide an innovative and extra ordinary beauty decorative finishes.
Features
- ☐ Easy and fast to apply.
- ☐ Excellent washability.
- ☐ Neither flammable nor hazards, being as mindful of the environment as of personal health.
- ☐ Has luminous sheen, marked by bright metallic reflections.
Uses
- As a decorative finish is ideal for interior new as well as old surfaces i.e. ☐ All kind of plasters, plaster boards, gypsum boards. ☐ Wood surfaces primed using wood primer. ☐ Old Paints.
Product description
A water-borne decorative paint finishes paints based on modified Acrylic Copolymer, mixed with micaceous and metallic pigments to provide an innovative and extra ordinary beauty decorative finishes.
Special features
☐ Easy and fast to apply. ☐ Excellent washability. ☐ Neither flammable nor hazards, being as mindful of the environment as of personal health. ☐ Has luminous sheen, marked by bright metallic reflections.
Where to use
As a decorative finish is ideal for interior new as well as old surfaces i.e. ☐ All kind of plasters, plaster boards, gypsum boards. ☐ Wood surfaces primed using wood primer. ☐ Old Paints.
Product data
FINISH : Smooth Perlescent, and Metallic Reflection. COLOUR : According to GTC COLOUR CARD, DL-DECORATIVE LINE CATALOGUE FOR EACH PRODUCT. Special colours are available upon request. PRODUCT WEIGHT : 1.03 - 1.1 Kg/Ltr. THEO. COVERAGE : 8 m²/ ltr. per coat Practical coverage primarily depends upon nature/degree of surface porosity, method of application and site conditions. FLASH POINT : Non-flammable (water-borne product)
Drying times
SUBSTRATE TEMPERATURE | TOUCH DRY | HARD DRY | OVERCOATING INTERVALS (MINIMUM | MAXIMUM) 10°C (50°F) | 3 hrs. | 7 hrs. | 5 hrs. | IND. 25°C (77°F) | 2 hrs. | 6 hrs. | 4 hrs. | IND. 40°C (104°F) | 1 hour | 5 hrs. | 3 hrs. | IND.
Important restrictions
Complete Drying 2-3 days. Dilution : Ready made, no need.
Surface preparation
Remove all dust, dirt, oil and grease contamination, loose particles, laitance and old paint...etc, the surface must be clean and dry.
Application details
1st Application : Two coats DL ART Primer according to the colour required. 2nd Application : One coat of finish product required. APPLICATION METHOD FOR FINISH COAT: 1) On the matching colour of DL-ART PRIMER apply with “GTC Decorative Line” brush using cross hatch strokes covering an area of approx 1-2 m² blend then the decoration with the dry brush. 2) After about 5-10 minutes create the décor by smoothing the surface with the special GTC DL Spatula.
Cleaning tools
For cleaning tools and equipment use fresh water only.
Application conditions
At a temperature ranging 5ºC (41ºF) to 40ºC (104 ºF). Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5ºC (41ºF) to 40ºC (104 ºF).
Standards and approvals
Supportive information is available upon request to establish product compliance with a particular specification. Please consult with GTC Technical Service Dept.
Safety precautions
The following notes should be considered when using/applying painting material: (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
• 2.5 ltr. Can • 1 ltr. Plastic Can.