A clear, water-based decorative finish for indoor use, consisting of water borne polyurethane resins mixed with special additives Owing to its clear matt look, DL Promatt affords a particular sense of security, an “ overcast “ look and a pleasant feel.
Features
- ☐ The finish shields the colored surfaces from dust, smoke, and smudges, hindering the yellowing brought about by aging.
- ☐ Easy to apply and can achieve fine decorations.
- ☐ Fully washable and waterproof.
- ☐ Neither flammable nor hazardous, being a mindful of the environment as of personal health.
- ☐ Gives matt, anti-glaze look, and gives the surface an especially pleasant feeling to touch.
Uses
- DL Promatt is decorative finish ideal for interior surfaces and may applied to all kinds of painted or unpainted plasters, plaster boards, and concrete surfaces, as well as wood and metal panels as long as they are treated with appropriate primers.
Product description
A clear, water-based decorative finish for indoor use, consisting of water borne polyurethane resins mixed with special additives Owing to its clear matt look, DL Promatt affords a particular sense of security, an “ overcast “ look and a pleasant feel.
Special features
☐ The finish shields the colored surfaces from dust, smoke, and smudges, hindering the yellowing brought about by aging. ☐ Easy to apply and can achieve fine decorations. ☐ Fully washable and waterproof. ☐ Neither flammable nor hazardous, being a mindful of the environment as of personal health. ☐ Gives matt, anti-glaze look, and gives the surface an especially pleasant feeling to touch.
Where to use
DL Promatt is decorative finish ideal for interior surfaces and may applied to all kinds of painted or unpainted plasters, plaster boards, and concrete surfaces, as well as wood and metal panels as long as they are treated with appropriate primers.
Product data
FINISH : MATT . COLOUR : CLEAR . PRODUCT WEIGHT : 1.04 Kg/Ltr. THEO. COVERAGE : 11 m²/ ltr. per coat Practical coverage primarily depends upon nature/degree of surface porosity, method of application and site conditions. FLASH POINT : Non-flammable (water-borne product)
Drying times
--------------------------------------------- SUBSTRATE | TOUCH | HARD | OVERCOATING INTERVALS TEMPERATURE | DRY | DRY | MINIMUM | MAXIMUM --------------------------------------------- 10 °C (50 °F)| 3 hrs. | 5 hrs. | 5 hrs. | IND. 25 °C (77 °F)| 2 hrs. | 4 hrs. | 4 hrs. | IND. 40 °C (104 °F)| 1 hour | 3 hrs. | 3 hrs. | IND. ---------------------------------------------
Surface preparation
Remove all dust, dirt, oil and grease contamination, loose particles, laitance and old paint…etc, the surface must be smooth , dry and completely unimpaired.
Application details
DL Promatt is ready to use, no need of thinning. 1. APPLICATION OF CONCRETE/PLASTER WALLS: 1st Coat : One coat Acrylic Sealer 100% thinning by volume with water. OR Penetrol Sealer 25% thinning by volume with water. 2nd & 3rd Coat : One coat Emulsion Paint color. 4th Coat : Two coats of DL Promatt.
Cleaning tools
For cleaning tools and equipment use fresh water only.
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104 °F) . Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5°C (41°F) to 40°C (104 °F).
Standards and approvals
Supportive information is available upon request to establish product compliance with a particular specification. Please consult with GTC Technical Service Dept.
Safety precautions
The following notes should be considered when using/applying painting material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
• 2.5 ltr. Plastic Can.