A siloxane water-based paint ideal for interior and exterior use, it is best solution to protect surfaces and decorative coating such as DL Travertine Ferenza, Adobe ....etc, and allow to create waterproof surface and gives the finishing particular shades.
Features
- Easy to apply.
- Neither flammable nor hazardous, being as mindful of the environment as of personal health.
- Is ideal finishing to protect decorated coating such as DL Travertine and gives the surface elegant shades of colour.
- Excellent weather resistance.
- Washable and water proof.
Uses
- As a protective/decorative coating for exterior and interior surfaces.
Product description
A siloxane water-based paint ideal for interior and exterior use, it is best solution to protect surfaces and decorative coating such as DL Travertine Ferenza, Adobe ....etc, and allow to create waterproof surface and gives the finishing particular shades.
Special features
- Easy to apply. - Neither flammable nor hazardous, being as mindful of the environment as of personal health. - Is ideal finishing to protect decorated coating such as DL Travertine and gives the surface elegant shades of colour. - Excellent weather resistance. - Washable and water proof.
Where to use
As a protective/decorative coating for exterior and interior surfaces.
Product data
FINISH : MATT COLOUR : Clear & according to GTC COLOUR CARD, Special colours are available upon request. PRODUCT WEIGHT : 1.02 Kg/Ltr. THEO. COVERAGE : 19 m2/ltr. per coat Practical coverage primarily depends upon nature/degree of surface porosity, method of application and site conditions. FLASH POINT : Non-flammable (water-borne product)
Drying times
SUBSTRATE TEMPERATURE | TOUCH DRY | HARD DRY | OVERCOATING INTERVALS MINIMUM | MAXIMUM 10 °C (50 °F) | 3 hrs. | 5 hrs. | 5 hrs. | IND. 25 °C (77 °F) | 2 hrs. | 4 hrs. | 4 hrs. | IND. 40 °C (104 °F) | 1 hour | 3 hrs. | 3 hrs. | IND.
Surface preparation
The surface should be clean and completely dry.
Application details
Intended for one or two coats after thinning of water by volume from 50%-100% depending by the desired effect.
Cleaning tools
For cleaning tools and equipment use fresh water only.
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104 °F). Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5°C (41°F) to 40°C (104 °F).
Standards and approvals
Supportive information is available upon request to establish product compliance with a particular specification. Please consult with GTC Technical Service Dept.
Safety precautions
The following notes should be considered when using/applying painting material:- (a) Take precautions to prevent material entering the eyes (goggles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
- 2.5 ltr. Can - 15 ltr. Drum