DL Travertine is a decorative finish for indoor and outdoor use, based on seasoned slaked lime and natural fillers. Its all-natural makeup and its versatility, and depending on the application technique used, DL Travertine produces fascinating classical embellishments with travertine effect, or innovative embellishments with natural slate effect, applied as per suggested cycle.
Features
- It is thoroughly washable.
- Neither flammable nor hazardous, being as mindful of the environment as of personal health.
- Characterized by elegant patterns and shades that depending on the application technique.
- Stand out in a more or less uniform fashion, producing decorations that very closely resemble famed stores such as slate and travertine.
Uses
- As a decorative finish for interior and exterior new as well as old surfaces i.e. :- All kinds of plaster, plasterboards, gypsum boards. Ideal for creating beautiful "exposed stone" decorations, whether on indoor surfaces, facades, wainscoting, pillars or other outdoor surfaces.
Product description
DL Travertine is a decorative finish for indoor and outdoor use, based on seasoned slaked lime and natural fillers. Its all-natural makeup and its versatility, and depending on the application technique used, DL Travertine produces fascinating classical embellishments with travertine effect, or innovative embellishments with natural slate effect, applied as per suggested cycle.
Special features
It is thoroughly washable. Neither flammable nor hazardous, being as mindful of the environment as of personal health. Characterized by elegant patterns and shades that depending on the application technique. Stand out in a more or less uniform fashion, producing decorations that very closely resemble famed stores such as slate and travertine.
Where to use
As a decorative finish for interior and exterior new as well as old surfaces i.e. :- All kinds of plaster, plasterboards, gypsum boards. Ideal for creating beautiful "exposed stone" decorations, whether on indoor surfaces, facades, wainscoting, pillars or other outdoor surfaces.
Product data
FINISH : Matt. PRODUCT WEIGHT : 1 Kg/Ltr. THEO. COVERAGE : 2.5-3.5 kg/ m2 Depending on substrate and desired effect . FLASH POINT : Non-flammable (water-borne product)
Drying times
SUBSTRATE | TOUCH | HARD | OVERCOATING INTERVALS TEMPERATURE | DRY | DRY | MINIMUM | MAXIMUM 10 °C (50 °F) | 3 hrs. | 5 hrs. | 5 hrs. | IND. 25 °C (77 °F) | 2 hrs. | 4 hrs. | 4 hrs. | IND. 40 °C (104 °F) | 1 hour | 3 hrs. | 3 hrs. | IND.
Surface preparation
Remove all dust, dirt, oil and grease contamination, loose particles, laitance and old paint...etc, the surface must be smooth and dry.
Application details
APPLICATION OF CONCRETE/PLASTER WALLS (Intend for two finish coats) : 1st Coat : One coat Acrylic Sealer 100% thinning by volume with water. OR Penetrol Sealer 25% thinning by volume with water. 2nd Coat : One coat DL ART Primer 10% thinning by volume with water. 3rd Coat : There are two types of effect could by obtained : a) Travertine effect: Apply a first coat of Travertine using a stainless steel float, and spread the product evenly onto the surface. Once dried, use special adhesive tape to square up as desired, and then apply a second coat of KOLOSSOS in the same manner. Before it dries, proceed to "work the surface" (using a specific brush) based on the desired end result, and to flatten the coating with a stainless steel float. The product requires no thinning (no more than 5% water thinning is allowed) and must be blended mechanically before use. b) Ardesia effect: Apply a first coat of Travertine using a stainless steel float, and spread the product evenly onto the surface. Once dried, apply a second coat of KOLOSSOS in the same manner. Before it dries completely, proceed to "word the surface" with a special rubber roller. Then lightly flatten the surface with a stainless style float.
Important restrictions
To obtained the desired effect and colour apply DL SYLOX OR DL OSSADINI decorative Finish in the colour of choice.
Cleaning tools
For cleaning tools and equipment use fresh water only.
Mixing and thinning
The product is ready to use and therefore requires no thinning. Mixing, stair thoroughly with a mechanical device before use.
Application conditions
At a temperature ranging 5°C (41°F) to 40°C (104 °F) . Relative humidity is below 75%.
Storage and handling
Product must be stored as per local regulations and should be kept in dry well ventilated location far from heat and direct sunlight. Can should be tightly closed after use. Mix well before use. Storage temperature range between 5°C (41°F) to 40°C (104 °F).
Standards and approvals
Supportive information is available upon request to establish product compliance with a particular specification. Please consult with GTC Technical Service Dept.
Safety precautions
The following notes should be considered when using/applying painting material:- (a) Take precautions to prevent material entering the eyes (googles should be worn, irrigate the eyes with water when become contaminated and obtain medical care at once). (b) Take precautions to avoid skin contact (gloves should be worn, barrier cream should be used). (c) Ensure that repeated contact of paint with skin is avoided. (d) Provide adequate ventilation. (Face masks must be worn). (e) Keep away from sparks and open flames (for solvent-based materials).
Pack sizes
2.5 ltr. Can 15 ltr. Drum